- Active Compensation of Dose and kVp
- Precision Enhanced by Productivity
- Modality Specific
Leading precision designed for specific needs
The RaySafe Solo is a line of meters for Quality
Assurance and Service of Diagnostic X-ray machines. The RaySafe Solo
is designed for specific x-ray modalities where it provides the user with
essential features combined with leading precision.
While the RaySafe Solo shares the core technology from the market
leader, RaySafe Xi, it has been adapted to fit a defined need.
The RaySafe Solo line consists of
various meters. Each RaySafe Solo model includes a Base Unit and one
detector, which enables accurate and scenario-specific measurements. Depending on
the RaySafe Solo model used, parameters such
as kVp, dose, dose rate, pulses, time, mA and
mAs are measured. Additional options such as
direct HVL measurements and waveform display
are available to further improve the informative
value of the measured data.
Easy to Use
Because of its intuitive user interface and built-in
intelligence, you can rapidly learn how to use the RaySafe Solo.
The user will be able to focus on interpreting the measured date instead of focusing
on how to obtain data. Ease-of-use saves time, but most importantly, it minimizes the risk of user errors.
With minimal setup time, acquiring your
first exposure take less than one minute.
Active Compensation Improves Productivity
The RaySafe Solo uses the Active Compensation
feature for all beam qualities. Multiple solid state
sensors and advanced calculations automatically
determine the beam values. This results in a higher
degree of simplicity for the user since no further
corrections are needed to achieve maximum accuracy. Traditional fragile ion chambers can be
substituted with RaySafe small and lightweight solid
state detectors to achieve accurate measurements.
Click Here for the Raysafe Solo Overview Printable Datasheet (PDF Format)
Click Here for the Raysafe Solo Specifications and Options Datasheet (PDF Format)
The RaySafe Solo consists of a detector and a Base
Unit for read-out of the measured data. The detector is connected to the Base Unit using a detachable 2
or 10 meter cable. Simply connect the detector and you are ready for measurements. By pressing one of the
two buttons on the RaySafe Solo Base Unit, all functions and
results can easily be viewed on the
three row back-lit alphanumerical display.
Whether your application is dose rate measurements on fluoroscopy or a kVp measurement on DR machines,
the RaySafe Solo is capable of handling many user scenarios.
From low dose rate measurements up to high dose exposures, one
detector ensures high precision regardless of beam quality.
RaySafe Solo R/F
Measures kVp, dose, dose rate, time and pulse measurements on Radiographic and Fluoroscopic X-ray machines
This Solo model is the solution for physicists and others, when only R/F applications are needed.
Optionally, mAs can be added. Simultaneous measurements of radiation parameters and mAs can be obtained
with the detector placed in the radiation field and the meter connected to the mAs port.
Spec Sheet on the RaySafe Solo R/F Detector (PDF Format)
RaySafe Solo mAs
Invasive Measurement of Tube Current
Invasive mA, mAs, time and pulse measurements on X-ray machines can be performed with this Solo model.
The RaySafe Solo mAs is a simple standalone solution for measuring tube current from diagnostic X-ray machines.
Specifications for the RaySafe Solo mAs Detector (PDF Format)
RaySafe Solo RAD
kVp, dose, dose rate, time and pulse measurements on Radiographic X-ray machines
When your applications are limited to multiparameter measurements on Radiographic machines only,
this model is the better choice. The RaySafe Solo RAD measures kVp, dose, dose rate, time and pulse
on Radiographic X-ray machines. If the RaySafe Solo PC kit is added, your meter will also display waveforms
on a PC as well as interface to Excel for reporting purposes.
Specifications for the RaySafe Solo RAD Detector (PDF Format)
RaySafe Solo CT
Dose and Dose length product measurements on CT machines
The RaySafe Solo CT features a hybrid ion chamber designed by RaySafe.
The ion chamber and electronics are combined into one unit making it possible to
measure both temperature and pressure to actively compensate for this energy dependency.
Specifications for the RaySafe Solo CT Detector (PDF Format)
RaySafe Solo MAM
Measurements on a large variety of mammography machines
The RaySafe Solo MAM is available in two models: RaySafe Solo MAM and RaySafe Solo MAM dose.
They are the ideal solutions for measurements on a large variety of mammography machines.
Both support the beam qualities Mo/Mo, Mo/Al, Mo/Rh, Rh/Rh, Rh/Al, W/Rh and W/Ag and measure dose,
dose rate, time. Additionally the RaySafe Solo MAM also includes kV for the beam qualities Mo/Mo and W/Rh.
Specifications for the RaySafe Solo MAM Detector (PDF Format)
RaySafe Solo DENT
Leading precision designed for dental X-ray measurements
The RaySafe Solo DENT simultaneously measures the parameters kVp, dose, dose rate, pulses and time.
Options such as direct HVL measurements and waveform display, further enhance the
RaySafe Solo experience. In addition, with its minimal setup time, acquiring
your first exposure take less than one minute.
- Designed for dental X-ray measurements
- Measures on intraoral, panoramic and Cone Beam CT
- Intuitive user interface
- Leading precision and ease-of-use
- kVp, dose, rate, pulses and time. HVL and waveforms (optional)
Specifications for the RaySafe Solo DENT Detector (PDF Format)
RaySafe Solo Dose
Dose, dose rate, time and pulses on Radiographic and Fluoroscopic X-ray machines
The most straight-forward model in the RaySafe Solo assortment measures dose,
dose rate, time and pulses on both Radiographic and Fluoroscopic X-ray machines.
It is ideal when the need is limited to performing dose measurements only. With the
RaySafe Solo Dose you will have full range dose meter for almost any application.
Specifications for the RaySafe Solo Dose Detector (PDF Format)
High precision for testing medical monitors
The RaySafe Solo Light offers luminance and illuminance measurements for testing
medical monitors including LCD and CRT. The luminance tube is used for contact
measurements while removed the instrument will measure ambient light.
The detector can also be used for testing view boxes and collimators.
Specifications for the RaySafe Solo Light Detector (PDF Format)